<?php

/**

 * @file

 * Drupal site-specific configuration file.

 *

 * IMPORTANT NOTE:

 * This file may have been set to read-only by the Drupal installation program.

 * If you make changes to this file, be sure to protect it again after making

 * your modifications. Failure to remove write permissions to this file is a

 * security risk.

 *

 * The configuration file to be loaded is based upon the rules below. However

 * if the multisite aliasing file named sites/sites.php is present, it will be

 * loaded, and the aliases in the array $sites will override the default

 * directory rules below. See sites/example.sites.php for more information about

 * aliases.

 *

 * The configuration directory will be discovered by stripping the website's

 * hostname from left to right and pathname from right to left. The first

 * configuration file found will be used and any others will be ignored. If no

 * other configuration file is found then the default configuration file at

 * 'sites/default' will be used.

 *

 * For example, for a fictitious site installed at

 * http://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched

 * for in the following directories:

 *

 * - sites/8080.www.drupal.org.mysite.test

 * - sites/www.drupal.org.mysite.test

 * - sites/drupal.org.mysite.test

 * - sites/org.mysite.test

 *

 * - sites/8080.www.drupal.org.mysite

 * - sites/www.drupal.org.mysite

 * - sites/drupal.org.mysite

 * - sites/org.mysite

 *

 * - sites/8080.www.drupal.org

 * - sites/www.drupal.org

 * - sites/drupal.org

 * - sites/org

 *

 * - sites/default

 *

 * Note that if you are installing on a non-standard port number, prefix the

 * hostname with that number. For example,

 * http://www.drupal.org:8080/mysite/test/ could be loaded from

 * sites/8080.www.drupal.org.mysite.test/.

 *

 * @see example.sites.php

 * @see conf_path()

 */

/**

 * Database settings:

 *

 * The $databases array specifies the database connection or

 * connections that Drupal may use.  Drupal is able to connect

 * to multiple databases, including multiple types of databases,

 * during the same request.

 *

 * Each database connection is specified as an array of settings,

 * similar to the following:

 * @code

 * array(

 *   'driver' => 'mysql',

 *   'database' => 'databasename',

 *   'username' => 'username',

 *   'password' => 'password',

 *   'host' => 'localhost',

 *   'port' => 3306,

 *   'prefix' => 'myprefix_',

 *   'collation' => 'utf8_general_ci',

 * );

 * @endcode

 *

 * The "driver" property indicates what Drupal database driver the

 * connection should use.  This is usually the same as the name of the

 * database type, such as mysql or sqlite, but not always.  The other

 * properties will vary depending on the driver.  For SQLite, you must

 * specify a database file name in a directory that is writable by the

 * webserver.  For most other drivers, you must specify a

 * username, password, host, and database name.

 *

 * Transaction support is enabled by default for all drivers that support it,

 * including MySQL. To explicitly disable it, set the 'transactions' key to

 * FALSE.

 * Note that some configurations of MySQL, such as the MyISAM engine, don't

 * support it and will proceed silently even if enabled. If you experience

 * transaction related crashes with such configuration, set the 'transactions'

 * key to FALSE.

 *

 * For each database, you may optionally specify multiple "target" databases.

 * A target database allows Drupal to try to send certain queries to a

 * different database if it can but fall back to the default connection if not.

 * That is useful for master/slave replication, as Drupal may try to connect

 * to a slave server when appropriate and if one is not available will simply

 * fall back to the single master server.

 *

 * The general format for the $databases array is as follows:

 * @code

 * $databases['default']['default'] = $info_array;

 * $databases['default']['slave'][] = $info_array;

 * $databases['default']['slave'][] = $info_array;

 * $databases['extra']['default'] = $info_array;

 * @endcode

 *

 * In the above example, $info_array is an array of settings described above.

 * The first line sets a "default" database that has one master database

 * (the second level default).  The second and third lines create an array

 * of potential slave databases.  Drupal will select one at random for a given

 * request as needed.  The fourth line creates a new database with a name of

 * "extra".

 *

 * For a single database configuration, the following is sufficient:

 * @code

 * $databases['default']['default'] = array(

 *   'driver' => 'mysql',

 *   'database' => 'databasename',

 *   'username' => 'username',

 *   'password' => 'password',

 *   'host' => 'localhost',

 *   'prefix' => 'main_',

 *   'collation' => 'utf8_general_ci',

 * );

 * @endcode

 *

 * You can optionally set prefixes for some or all database table names

 * by using the 'prefix' setting. If a prefix is specified, the table

 * name will be prepended with its value. Be sure to use valid database

 * characters only, usually alphanumeric and underscore. If no prefixes

 * are desired, leave it as an empty string ''.

 *

 * To have all database names prefixed, set 'prefix' as a string:

 * @code

 *   'prefix' => 'main_',

 * @endcode

 * To provide prefixes for specific tables, set 'prefix' as an array.

 * The array's keys are the table names and the values are the prefixes.

 * The 'default' element is mandatory and holds the prefix for any tables

 * not specified elsewhere in the array. Example:

 * @code

 *   'prefix' => array(

 *     'default'   => 'main_',

 *     'users'     => 'shared_',

 *     'sessions'  => 'shared_',

 *     'role'      => 'shared_',

 *     'authmap'   => 'shared_',

 *   ),

 * @endcode

 * You can also use a reference to a schema/database as a prefix. This may be

 * useful if your Drupal installation exists in a schema that is not the default

 * or you want to access several databases from the same code base at the same

 * time.

 * Example:

 * @code

 *   'prefix' => array(

 *     'default'   => 'main.',

 *     'users'     => 'shared.',

 *     'sessions'  => 'shared.',

 *     'role'      => 'shared.',

 *     'authmap'   => 'shared.',

 *   );

 * @endcode

 * NOTE: MySQL and SQLite's definition of a schema is a database.

 *

 * Advanced users can add or override initial commands to execute when

 * connecting to the database server, as well as PDO connection settings. For

 * example, to enable MySQL SELECT queries to exceed the max_join_size system

 * variable, and to reduce the database connection timeout to 5 seconds:

 *

 * @code

 * $databases['default']['default'] = array(

 *   'init_commands' => array(

 *     'big_selects' => 'SET SQL_BIG_SELECTS=1',

 *   ),

 *   'pdo' => array(

 *     PDO::ATTR_TIMEOUT => 5,

 *   ),

 * );

 * @endcode

 *

 * WARNING: These defaults are designed for database portability. Changing them

 * may cause unexpected behavior, including potential data loss.

 *

 * @see DatabaseConnection_mysql::__construct

 * @see DatabaseConnection_pgsql::__construct

 * @see DatabaseConnection_sqlite::__construct

 *

 * Database configuration format:

 * @code

 *   $databases['default']['default'] = array(

 *     'driver' => 'mysql',

 *     'database' => 'databasename',

 *     'username' => 'username',

 *     'password' => 'password',

 *     'host' => 'localhost',

 *     'prefix' => '',

 *   );

 *   $databases['default']['default'] = array(

 *     'driver' => 'pgsql',

 *     'database' => 'databasename',

 *     'username' => 'username',

 *     'password' => 'password',

 *     'host' => 'localhost',

 *     'prefix' => '',

 *   );

 *   $databases['default']['default'] = array(

 *     'driver' => 'sqlite',

 *     'database' => '/path/to/databasefilename',

 *   );

 * @endcode

 */

$databases = array (

  'default' =>

  array (

    'default' =>

    array (

      'database' => 'corpusdelaparole',

      'username' => 'corpus',

      'password' => 'C0rpusDLP',

      'host' => 'db',

      'port' => '',

      'driver' => 'mysql',

      'prefix' => '',

    ),

  ),

);

/**

 * Access control for update.php script.

 *

 * If you are updating your Drupal installation using the update.php script but

 * are not logged in using either an account with the "Administer software

 * updates" permission or the site maintenance account (the account that was

 * created during installation), you will need to modify the access check

 * statement below. Change the FALSE to a TRUE to disable the access check.

 * After finishing the upgrade, be sure to open this file again and change the

 * TRUE back to a FALSE!

 */

$update_free_access = FALSE;

/**

 * Salt for one-time login links and cancel links, form tokens, etc.

 *

 * This variable will be set to a random value by the installer. All one-time

 * login links will be invalidated if the value is changed. Note that if your

 * site is deployed on a cluster of web servers, you must ensure that this

 * variable has the same value on each server. If this variable is empty, a hash

 * of the serialized database credentials will be used as a fallback salt.

 *

 * For enhanced security, you may set this variable to a value using the

 * contents of a file outside your docroot that is never saved together

 * with any backups of your Drupal files and database.

 *

 * Example:

 *   $drupal_hash_salt = file_get_contents('/home/example/salt.txt');

 *

 */

$drupal_hash_salt = '9Sv81aAK6y_Bc8daATnuezri5VuuIIlrtNjrJLK5fmA';

/**

 * Base URL (optional).

 *

 * If Drupal is generating incorrect URLs on your site, which could

 * be in HTML headers (links to CSS and JS files) or visible links on pages

 * (such as in menus), uncomment the Base URL statement below (remove the

 * leading hash sign) and fill in the absolute URL to your Drupal installation.

 *

 * You might also want to force users to use a given domain.

 * See the .htaccess file for more information.

 *

 * Examples:

 *   $base_url = 'http://www.example.com';

 *   $base_url = 'http://www.example.com:8888';

 *   $base_url = 'http://www.example.com/drupal';

 *   $base_url = 'https://www.example.com:8888/drupal';

 *

 * It is not allowed to have a trailing slash; Drupal will add it

 * for you.

 */

# $base_url = 'http://www.example.com';  // NO trailing slash!

/**

 * PHP settings:

 *

 * To see what PHP settings are possible, including whether they can be set at

 * runtime (by using ini_set()), read the PHP documentation:

 * http://www.php.net/manual/ini.list.php

 * See drupal_environment_initialize() in includes/bootstrap.inc for required

 * runtime settings and the .htaccess file for non-runtime settings. Settings

 * defined there should not be duplicated here so as to avoid conflict issues.

 */

/**

 * Some distributions of Linux (most notably Debian) ship their PHP

 * installations with garbage collection (gc) disabled. Since Drupal depends on

 * PHP's garbage collection for clearing sessions, ensure that garbage

 * collection occurs by using the most common settings.

 */

ini_set('session.gc_probability', 1);

ini_set('session.gc_divisor', 100);

/**

 * Set session lifetime (in seconds), i.e. the time from the user's last visit

 * to the active session may be deleted by the session garbage collector. When

 * a session is deleted, authenticated users are logged out, and the contents

 * of the user's $_SESSION variable is discarded.

 */

ini_set('session.gc_maxlifetime', 200000);

/**

 * Set session cookie lifetime (in seconds), i.e. the time from the session is

 * created to the cookie expires, i.e. when the browser is expected to discard

 * the cookie. The value 0 means "until the browser is closed".

 */

ini_set('session.cookie_lifetime', 2000000);

/**

 * If you encounter a situation where users post a large amount of text, and

 * the result is stripped out upon viewing but can still be edited, Drupal's

 * output filter may not have sufficient memory to process it.  If you

 * experience this issue, you may wish to uncomment the following two lines

 * and increase the limits of these variables.  For more information, see

 * http://php.net/manual/pcre.configuration.php.

 */

# ini_set('pcre.backtrack_limit', 200000);

# ini_set('pcre.recursion_limit', 200000);

/**

 * Drupal automatically generates a unique session cookie name for each site

 * based on its full domain name. If you have multiple domains pointing at the

 * same Drupal site, you can either redirect them all to a single domain (see

 * comment in .htaccess), or uncomment the line below and specify their shared

 * base domain. Doing so assures that users remain logged in as they cross

 * between your various domains. Make sure to always start the $cookie_domain

 * with a leading dot, as per RFC 2109.

 */

# $cookie_domain = '.example.com';

/**

 * Variable overrides:

 *

 * To override specific entries in the 'variable' table for this site,

 * set them here. You usually don't need to use this feature. This is

 * useful in a configuration file for a vhost or directory, rather than

 * the default settings.php. Any configuration setting from the 'variable'

 * table can be given a new value. Note that any values you provide in

 * these variable overrides will not be modifiable from the Drupal

 * administration interface.

 *

 * The following overrides are examples:

 * - site_name: Defines the site's name.

 * - theme_default: Defines the default theme for this site.

 * - anonymous: Defines the human-readable name of anonymous users.

 * Remove the leading hash signs to enable.

 */

# $conf['site_name'] = 'My Drupal site';

# $conf['theme_default'] = 'garland';

# $conf['anonymous'] = 'Visitor';

/**

 * A custom theme can be set for the offline page. This applies when the site

 * is explicitly set to maintenance mode through the administration page or when

 * the database is inactive due to an error. It can be set through the

 * 'maintenance_theme' key. The template file should also be copied into the

 * theme. It is located inside 'modules/system/maintenance-page.tpl.php'.

 * Note: This setting does not apply to installation and update pages.

 */

# $conf['maintenance_theme'] = 'bartik';

/**

 * Reverse Proxy Configuration:

 *

 * Reverse proxy servers are often used to enhance the performance

 * of heavily visited sites and may also provide other site caching,

 * security, or encryption benefits. In an environment where Drupal

 * is behind a reverse proxy, the real IP address of the client should

 * be determined such that the correct client IP address is available

 * to Drupal's logging, statistics, and access management systems. In

 * the most simple scenario, the proxy server will add an

 * X-Forwarded-For header to the request that contains the client IP

 * address. However, HTTP headers are vulnerable to spoofing, where a

 * malicious client could bypass restrictions by setting the

 * X-Forwarded-For header directly. Therefore, Drupal's proxy

 * configuration requires the IP addresses of all remote proxies to be

 * specified in $conf['reverse_proxy_addresses'] to work correctly.

 *

 * Enable this setting to get Drupal to determine the client IP from

 * the X-Forwarded-For header (or $conf['reverse_proxy_header'] if set).

 * If you are unsure about this setting, do not have a reverse proxy,

 * or Drupal operates in a shared hosting environment, this setting

 * should remain commented out.

 *

 * In order for this setting to be used you must specify every possible

 * reverse proxy IP address in $conf['reverse_proxy_addresses'].

 * If a complete list of reverse proxies is not available in your

 * environment (for example, if you use a CDN) you may set the

 * $_SERVER['REMOTE_ADDR'] variable directly in settings.php.

 * Be aware, however, that it is likely that this would allow IP

 * address spoofing unless more advanced precautions are taken.

 */

# $conf['reverse_proxy'] = TRUE;

/**

 * Specify every reverse proxy IP address in your environment.

 * This setting is required if $conf['reverse_proxy'] is TRUE.

 */

# $conf['reverse_proxy_addresses'] = array('a.b.c.d', ...);

/**

 * Set this value if your proxy server sends the client IP in a header

 * other than X-Forwarded-For.

 */

# $conf['reverse_proxy_header'] = 'HTTP_X_CLUSTER_CLIENT_IP';

/**

 * Page caching:

 *

 * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page

 * views. This tells a HTTP proxy that it may return a page from its local

 * cache without contacting the web server, if the user sends the same Cookie

 * header as the user who originally requested the cached page. Without "Vary:

 * Cookie", authenticated users would also be served the anonymous page from

 * the cache. If the site has mostly anonymous users except a few known

 * editors/administrators, the Vary header can be omitted. This allows for

 * better caching in HTTP proxies (including reverse proxies), i.e. even if

 * clients send different cookies, they still get content served from the cache.

 * However, authenticated users should access the site directly (i.e. not use an

 * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid

 * getting cached pages from the proxy.

 */

# $conf['omit_vary_cookie'] = TRUE;

/**

 * CSS/JS aggregated file gzip compression:

 *

 * By default, when CSS or JS aggregation and clean URLs are enabled Drupal will

 * store a gzip compressed (.gz) copy of the aggregated files. If this file is

 * available then rewrite rules in the default .htaccess file will serve these

 * files to browsers that accept gzip encoded content. This allows pages to load

 * faster for these users and has minimal impact on server load. If you are

 * using a webserver other than Apache httpd, or a caching reverse proxy that is

 * configured to cache and compress these files itself you may want to uncomment

 * one or both of the below lines, which will prevent gzip files being stored.

 */

# $conf['css_gzip_compression'] = FALSE;

# $conf['js_gzip_compression'] = FALSE;

/**

 * Block caching:

 *

 * Block caching may not be compatible with node access modules depending on

 * how the original block cache policy is defined by the module that provides

 * the block. By default, Drupal therefore disables block caching when one or

 * more modules implement hook_node_grants(). If you consider block caching to

 * be safe on your site and want to bypass this restriction, uncomment the line

 * below.

 */

# $conf['block_cache_bypass_node_grants'] = TRUE;

/**

 * String overrides:

 *

 * To override specific strings on your site with or without enabling the Locale

 * module, add an entry to this list. This functionality allows you to change

 * a small number of your site's default English language interface strings.

 *

 * Remove the leading hash signs to enable.

 */

# $conf['locale_custom_strings_en'][''] = array(

#   'forum'      => 'Discussion board',

#   '@count min' => '@count minutes',

# );

/**

 *

 * IP blocking:

 *

 * To bypass database queries for denied IP addresses, use this setting.

 * Drupal queries the {blocked_ips} table by default on every page request

 * for both authenticated and anonymous users. This allows the system to

 * block IP addresses from within the administrative interface and before any

 * modules are loaded. However on high traffic websites you may want to avoid

 * this query, allowing you to bypass database access altogether for anonymous

 * users under certain caching configurations.

 *

 * If using this setting, you will need to add back any IP addresses which

 * you may have blocked via the administrative interface. Each element of this

 * array represents a blocked IP address. Uncommenting the array and leaving it

 * empty will have the effect of disabling IP blocking on your site.

 *

 * Remove the leading hash signs to enable.