[MASTER]

# Specify a configuration file.

#rcfile=

# Python code to execute, usually for sys.path manipulation such as

# pygtk.require().

#init-hook=

# Add files or directories to the blacklist. They should be base names, not

# paths.

ignore=CVS

# Add files or directories matching the regex patterns to the blacklist. The

# regex matches against base names, not paths.

ignore-patterns=

# Pickle collected data for later comparisons.

persistent=yes

# List of plugins (as comma separated values of python modules names) to load,

# usually to register additional checkers.

load-plugins=

# Use multiple processes to speed up Pylint.

jobs=1

# Allow loading of arbitrary C extensions. Extensions are imported into the

# active Python interpreter and may run arbitrary code.

unsafe-load-any-extension=no

# A comma-separated list of package or module names from where C extensions may

# be loaded. Extensions are loading into the active Python interpreter and may

# run arbitrary code

extension-pkg-whitelist=

# Allow optimization of some AST trees. This will activate a peephole AST

# optimizer, which will apply various small optimizations. For instance, it can

# be used to obtain the result of joining multiple strings with the addition

# operator. Joining a lot of strings can lead to a maximum recursion error in

# Pylint and this flag can prevent that. It has one side effect, the resulting

# AST will be different than the one from reality. This option is deprecated

# and it will be removed in Pylint 2.0.

optimize-ast=no

[MESSAGES CONTROL]

# Only show warnings with the listed confidence levels. Leave empty to show

# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED

confidence=

# Enable the message, report, category or checker with the given id(s). You can

# either give multiple identifier separated by comma (,) or put this option

# multiple time (only on the command line, not in the configuration file where

# it should appear only once). See also the "--disable" option for examples.

#enable=

# Disable the message, report, category or checker with the given id(s). You

# can either give multiple identifiers separated by comma (,) or put this

# option multiple times (only on the command line, not in the configuration

# file where it should appear only once).You can also use "--disable=all" to

# disable everything first and then reenable specific checks. For example, if

# you want to run only the similarities checker, you can use "--disable=all

# --enable=similarities". If you want to run only the classes checker, but have

# no Warning level messages displayed, use"--disable=all --enable=classes

# --disable=W"

#disable=print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,import-star-module-level,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,#unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,#input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,long-suffix,old-ne-operator,old-octal-literal,suppressed-message,useless-suppression,missing-docstring

disable=missing-docstring

[REPORTS]

# Set the output format. Available formats are text, parseable, colorized, msvs

# (visual studio) and html. You can also give a reporter class, eg

# mypackage.mymodule.MyReporterClass.

output-format=text

# Put messages in a separate file for each module / package specified on the

# command line instead of printing them on stdout. Reports (if any) will be

# written in a file name "pylint_global.[txt|html]". This option is deprecated

# and it will be removed in Pylint 2.0.

files-output=no

# Tells whether to display a full report or only the messages

reports=yes

# Python expression which should return a note less than 10 (10 is the highest

# note). You have access to the variables errors warning, statement which

# respectively contain the number of errors / warnings messages and the total

# number of statements analyzed. This is used by the global evaluation report

# (RP0004).

evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

# Template used to display messages. This is a python new-style format string

# used to format the message information. See doc for all details

#msg-template=

[BASIC]

# Good variable names which should always be accepted, separated by a comma

good-names=i,j,k,ex,Run,_

# Bad variable names which should always be refused, separated by a comma

bad-names=foo,bar,baz,toto,tutu,tata

# Colon-delimited sets of names that determine each other's naming style when

# the name regexes allow several styles.

name-group=

# Include a hint for the correct naming format with invalid-name

include-naming-hint=no

# List of decorators that produce properties, such as abc.abstractproperty. Add

# to this list to register other decorators that produce valid properties.

property-classes=abc.abstractproperty

# Regular expression matching correct module names

module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$

# Naming hint for module names

module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$

# Regular expression matching correct constant names

const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$

# Naming hint for constant names

const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$

# Regular expression matching correct class names

class-rgx=[A-Z_][a-zA-Z0-9]+$

# Naming hint for class names

class-name-hint=[A-Z_][a-zA-Z0-9]+$

# Regular expression matching correct function names

function-rgx=[a-z_][a-z0-9_]{2,30}$

# Naming hint for function names

function-name-hint=[a-z_][a-z0-9_]{2,30}$

# Regular expression matching correct method names

method-rgx=[a-z_][a-z0-9_]{2,30}$

# Naming hint for method names

method-name-hint=[a-z_][a-z0-9_]{2,30}$

# Regular expression matching correct attribute names

attr-rgx=[a-z_][a-z0-9_]{2,30}$

# Naming hint for attribute names

attr-name-hint=[a-z_][a-z0-9_]{2,30}$

# Regular expression matching correct argument names

argument-rgx=[a-z_][a-z0-9_]{2,30}$

# Naming hint for argument names

argument-name-hint=[a-z_][a-z0-9_]{2,30}$

# Regular expression matching correct variable names

variable-rgx=[a-z_][a-z0-9_]{2,30}$

# Naming hint for variable names

variable-name-hint=[a-z_][a-z0-9_]{2,30}$

# Regular expression matching correct class attribute names

class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$

# Naming hint for class attribute names

class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$

# Regular expression matching correct inline iteration names

inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$

# Naming hint for inline iteration names

inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$

# Regular expression which should only match function or class names that do

# not require a docstring.

no-docstring-rgx=^_

# Minimum line length for functions/classes that require docstrings, shorter

# ones are exempt.

docstring-min-length=-1

[ELIF]

# Maximum number of nested blocks for function / method body

max-nested-blocks=5

[FORMAT]

# Maximum number of characters on a single line.

max-line-length=100

# Regexp for a line that is allowed to be longer than the limit.

ignore-long-lines=^\s*(# )?<?https?://\S+>?$

# Allow the body of an if to be on the same line as the test if there is no

# else.

single-line-if-stmt=no

# List of optional constructs for which whitespace checking is disabled. `dict-

# separator` is used to allow tabulation in dicts, etc.: {1  : 1,\n222: 2}.

# `trailing-comma` allows a space between comma and closing bracket: (a, ).

# `empty-line` allows space-only lines.

no-space-check=trailing-comma,dict-separator

# Maximum number of lines in a module

max-module-lines=1000

# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1

# tab).

indent-string='    '

# Number of spaces of indent required inside a hanging  or continued line.

indent-after-paren=4

# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.

expected-line-ending-format=

[LOGGING]

# Logging modules to check that the string format arguments are in logging

# function parameter format

logging-modules=logging

[MISCELLANEOUS]

# List of note tags to take in consideration, separated by a comma.

notes=FIXME,XXX,TODO

[SIMILARITIES]

# Minimum lines number of a similarity.

min-similarity-lines=4

# Ignore comments when computing similarities.

ignore-comments=yes

# Ignore docstrings when computing similarities.

ignore-docstrings=yes

# Ignore imports when computing similarities.

ignore-imports=no

[SPELLING]

# Spelling dictionary name. Available dictionaries: none. To make it working

# install python-enchant package.

spelling-dict=

# List of comma separated words that should not be checked.

spelling-ignore-words=

# A path to a file that contains private dictionary; one word per line.

spelling-private-dict-file=

# Tells whether to store unknown words to indicated private dictionary in

# --spelling-private-dict-file option instead of raising a message.

spelling-store-unknown-words=no

[TYPECHECK]

# Tells whether missing members accessed in mixin class should be ignored. A

# mixin class is detected if its name ends with "mixin" (case insensitive).

ignore-mixin-members=yes

# List of module names for which member attributes should not be checked

# (useful for modules/projects where namespaces are manipulated during runtime

# and thus existing member attributes cannot be deduced by static analysis. It

# supports qualified module names, as well as Unix pattern matching.

ignored-modules=

# List of class names for which member attributes should not be checked (useful

# for classes with dynamically set attributes). This supports the use of

# qualified names.

ignored-classes=optparse.Values,thread._local,_thread._local

# List of members which are set dynamically and missed by pylint inference

# system, and so shouldn't trigger E1101 when accessed. Python regular

# expressions are accepted.

generated-members=

# List of decorators that produce context managers, such as

# contextlib.contextmanager. Add to this list to register other decorators that

# produce valid context managers.

contextmanager-decorators=contextlib.contextmanager

[VARIABLES]

# Tells whether we should check for unused import in __init__ files.

init-import=no

# A regular expression matching the name of dummy variables (i.e. expectedly

# not used).

dummy-variables-rgx=(_+[a-zA-Z0-9]*?$)|dummy

# List of additional names supposed to be defined in builtins. Remember that

# you should avoid to define new builtins when possible.

additional-builtins=

# List of strings which can identify a callback function by name. A callback

# name must start or end with one of those strings.

callbacks=cb_,_cb

# List of qualified module names which can have objects that can redefine

# builtins.

redefining-builtins-modules=six.moves,future.builtins

[CLASSES]

# List of method names used to declare (i.e. assign) instance attributes.

defining-attr-methods=__init__,__new__,setUp

# List of valid names for the first argument in a class method.

valid-classmethod-first-arg=cls

# List of valid names for the first argument in a metaclass class method.

valid-metaclass-classmethod-first-arg=mcs

# List of member names, which should be excluded from the protected access

# warning.

exclude-protected=_asdict,_fields,_replace,_source,_make

[DESIGN]

# Maximum number of arguments for function / method

max-args=5

# Argument names that match this expression will be ignored. Default to name

# with leading underscore

ignored-argument-names=_.*

# Maximum number of locals for function / method body

max-locals=15

# Maximum number of return / yield for function / method body

max-returns=6

# Maximum number of branch for function / method body

max-branches=12

# Maximum number of statements in function / method body

max-statements=50

# Maximum number of parents for a class (see R0901).

max-parents=7

# Maximum number of attributes for a class (see R0902).

max-attributes=7

# Minimum number of public methods for a class (see R0903).

min-public-methods=2

# Maximum number of public methods for a class (see R0904).

max-public-methods=20

# Maximum number of boolean expressions in a if statement

max-bool-expr=5

[IMPORTS]

# Deprecated modules which should not be used, separated by a comma

deprecated-modules=optparse

# Create a graph of every (i.e. internal and external) dependencies in the

# given file (report RP0402 must not be disabled)

import-graph=

# Create a graph of external dependencies in the given file (report RP0402 must

# not be disabled)

ext-import-graph=

# Create a graph of internal dependencies in the given file (report RP0402 must

# not be disabled)

int-import-graph=

# Force import order to recognize a module as part of the standard

# compatibility libraries.

known-standard-library=

# Force import order to recognize a module as part of a third party library.

known-third-party=enchant

# Analyse import fallback blocks. This can be used to support both Python 2 and

# 3 compatible code, which means that the block might have code that exists

# only in one or another interpreter, leading to false positives when analysed.

analyse-fallback-blocks=no

[EXCEPTIONS]

# Exceptions that will emit a warning when being caught. Defaults to

# "Exception"

overgeneral-exceptions=Exception