INTRODUCTION

------------

This document describes how to:

  * Update your Drupal site from one minor 7.x version to another minor 7.x

    version; for example, from 7.8 to 7.9, or from 7.6 to 7.10.

  * Upgrade your Drupal site's major version from 6.x to 7.x.

First steps and definitions:

  * If you are upgrading to Drupal version x.y, then x is known as the major

    version number, and y is known as the minor version number. The download

    file will be named drupal-x.y.tar.gz (or drupal-x.y.zip).

  * All directories mentioned in this document are relative to the directory of

    your Drupal installation.

  * Make a full backup of all files, directories, and your database(s) before

    starting, and save it outside your Drupal installation directory.

    Instructions may be found at http://drupal.org/upgrade/backing-up-the-db

  * It is wise to try an update or upgrade on a test copy of your site before

    applying it to your live site. Even minor updates can cause your site's

    behavior to change.

  * Each new release of Drupal has release notes, which explain the changes made

    since the previous version and any special instructions needed to update or

    upgrade to the new version. You can find a link to the release notes for the

    version you are upgrading or updating to on the Drupal project page

    (http://drupal.org/project/drupal).

UPGRADE PROBLEMS

----------------

If you encounter errors during this process,

  * Note any error messages you see.

  * Restore your site to its previous state, using the file and database backups

    you created before you started the upgrade process. Do not attempt to do

    further upgrades on a site that had update problems.

  * Consult one of the support options listed on http://drupal.org/support

More in-depth information on upgrading can be found at http://drupal.org/upgrade

MINOR VERSION UPDATES

---------------------

To update from one minor 7.x version of Drupal to any later 7.x version, after

following the instructions in the INTRODUCTION section at the top of this file:

1. Log in as a user with the permission "Administer software updates".

2. Go to Administration > Configuration > Development > Maintenance mode.

   Enable the "Put site into maintenance mode" checkbox and save the

   configuration.

3. Remove all old core files and directories, except for the 'sites' directory

   and any custom files you added elsewhere.

   If you made modifications to files like .htaccess or robots.txt, you will

   need to re-apply them from your backup, after the new files are in place.

   Sometimes an update includes changes to default.settings.php (this will be

   noted in the release notes). If that's the case, follow these steps:

   - Locate your settings.php file in the /sites/* directory. (Typically

     sites/default.)

   - Make a backup copy of your settings.php file, with a different file name.

   - Make a copy of the new default.settings.php file, and name the copy

     settings.php (overwriting your previous settings.php file).

   - Copy the custom and site-specific entries from the backup you made into the

     new settings.php file. You will definitely need the lines giving the

     database information, and you will also want to copy in any other

     customizations you have added.

   You can find the release notes for your version at

   https://www.drupal.org/project/drupal. At bottom of the project page under

   "Downloads" use the link for your version of Drupal to view the release

   notes. If your version is not listed, use the 'View all releases' link. From

   this page you can scroll down or use the filter to find your version and its

   release notes.

4. Download the latest Drupal 7.x release from http://drupal.org to a

   directory outside of your web root. Extract the archive and copy the files

   into your Drupal directory.

   On a typical Unix/Linux command line, use the following commands to download

   and extract:

     wget http://drupal.org/files/projects/drupal-x.y.tar.gz

     tar -zxvf drupal-x.y.tar.gz

   This creates a new directory drupal-x.y/ containing all Drupal files and

   directories. Copy the files into your Drupal installation directory:

     cp -R drupal-x.y/* drupal-x.y/.htaccess /path/to/your/installation

   If you do not have command line access to your server, download the archive

   from http://drupal.org using your web browser, extract it, and then use an

   FTP client to upload the files to your web root.

5. Re-apply any modifications to files such as .htaccess or robots.txt.

6. Run update.php by visiting http://www.example.com/update.php (replace

   www.example.com with your domain name). This will update the core database

   tables.

   If you are unable to access update.php do the following:

   - Open settings.php with a text editor.

   - Find the line that says:

     $update_free_access = FALSE;

   - Change it into:

     $update_free_access = TRUE;

   - Once the upgrade is done, $update_free_access must be reverted to FALSE.

7. Go to Administration > Reports > Status report. Verify that everything is

   working as expected.

8. Ensure that $update_free_access is FALSE in settings.php.

9. Go to Administration > Configuration > Development > Maintenance mode.

   Disable the "Put site into maintenance mode" checkbox and save the

   configuration.

MAJOR VERSION UPGRADE

---------------------

To upgrade from a previous major version of Drupal to Drupal 7.x, after

following the instructions in the INTRODUCTION section at the top of this file:

1. Check on the Drupal 7 status of your contributed and custom modules and

   themes. See http://drupal.org/node/948216 for information on upgrading

   contributed modules and themes. See http://drupal.org/node/895314 for a list

   of modules that have been moved into core for Drupal 7, and instructions on

   how to update them. See http://drupal.org/update/modules for information on

   how to update your custom modules, and http://drupal.org/update/theme for

   custom themes.

   You may decide at this point that you cannot upgrade your site, because

   needed modules or themes are not ready for Drupal 7.

2. Update to the latest available version of Drupal 6.x (if your current version

   is Drupal 5.x, you have to upgrade to 6.x first). If you need to update,

   download Drupal 6.x and follow the instructions in its UPGRADE.txt. This

   document only applies for upgrades from 6.x to 7.x.

3. In addition to updating to the latest available version of Drupal 6.x core,

   you must also upgrade all of your contributed modules for Drupal to their

   latest Drupal 6.x versions.

4. Log in as user ID 1 (the site maintenance user).

5. Go to Administer > Site configuration > Site maintenance. Select

   "Off-line" and save the configuration.

6. Go to Administer > Site building > Themes. Enable "Garland" and select it as

   the default theme.

7. Go to Administer > Site building > Modules. Disable all modules that are not

   listed under "Core - required" or "Core - optional". It is possible that some

   modules cannot be disabled, because others depend on them. Repeat this step

   until all non-core modules are disabled.

   If you know that you will not re-enable some modules for Drupal 7.x and you

   no longer need their data, then you can uninstall them under the Uninstall

   tab after disabling them.

8. On the command line or in your FTP client, remove the file

     sites/default/default.settings.php

9. Remove all old core files and directories, except for the 'sites' directory

   and any custom files you added elsewhere.

   If you made modifications to files like .htaccess or robots.txt, you will

   need to re-apply them from your backup, after the new files are in place.

10. If you uninstalled any modules, remove them from the sites/all/modules and

   other sites/*/modules directories. Leave other modules in place, even though

   they are incompatible with Drupal 7.x.

11. Download the latest Drupal 7.x release from http://drupal.org to a

   directory outside of your web root. Extract the archive and copy the files

   into your Drupal directory.

   On a typical Unix/Linux command line, use the following commands to download

   and extract:

     wget http://drupal.org/files/projects/drupal-x.y.tar.gz

     tar -zxvf drupal-x.y.tar.gz

   This creates a new directory drupal-x.y/ containing all Drupal files and

   directories. Copy the files into your Drupal installation directory:

     cp -R drupal-x.y/* drupal-x.y/.htaccess /path/to/your/installation

   If you do not have command line access to your server, download the archive

   from http://drupal.org using your web browser, extract it, and then use an

   FTP client to upload the files to your web root.

12. Re-apply any modifications to files such as .htaccess or robots.txt.

13. Make your settings.php file writeable, so that the update process can

   convert it to the format of Drupal 7.x. settings.php is usually located in

     sites/default/settings.php

14. Run update.php by visiting http://www.example.com/update.php (replace

   www.example.com with your domain name). This will update the core database

   tables.

   If you are unable to access update.php do the following:

   - Open settings.php with a text editor.

   - Find the line that says:

     $update_free_access = FALSE;

   - Change it into:

     $update_free_access = TRUE;

   - Once the upgrade is done, $update_free_access must be reverted to FALSE.

15. Backup your database after the core upgrade has run.

16. Replace and update your non-core modules and themes, following the

   procedures at http://drupal.org/node/948216

17. Go to Administration > Reports > Status report. Verify that everything is

   working as expected.

18. Ensure that $update_free_access is FALSE in settings.php.

19. Go to Administration > Configuration > Development > Maintenance mode.

   Disable the "Put site into maintenance mode" checkbox and save the

   configuration.

To get started with Drupal 7 administration, visit

http://drupal.org/getting-started/7/admin